Description:
Mitsubishi L300
C-SH (04/1983–1994)
The
unique use of the van body shape in a 4WD sets the L200 and L300 vans
apart from just about any other 4WD vehicle on the market. The L series
can can be found as the basis for a number 4WD motorhome conversions.
Suspension Kits:
Light Rear Load: Up to 300kg
Ideal for vehicles carrying a constant load of 0kg–300kg.
Rear spring is specifically designed for heavy-duty use up to 300kg.
(Matching springs with weight is critical to performance. Talk to your
local dealer to ensure this kit is right for you.)
Kit Components:
- 41mm Foam Cell Shocks (Front) FC42058B × 2
- 41mm Foam Cell Shocks (Rear) FC41382 × 2
- Torsion Bars (Front) 4WTB-1726 × 2
Front Lift: 40mm Rear Lift: 40mm
Notes:
NO LEAF SPRINGS AVAILABLE
41mm Foam Cell Shocks: 41mm Bore Foam Cell Shock Absorbers
Tough
Dog’s award winning Foam Cell shock is our best selling shock for all
round performance. Whether you head bush on the occasional weekend or
for the majority of the year, Foam Cell shocks will handle your
application.
The ‘Foam Cell’ that makes all the
difference is a micro-cellular foam insert that helps to drastically
reduce the effects of shock fade, allowing your shocks to perform better
for longer, even on the harshest of corrugations. Cavitation and
Aeration are the undoing of any shock absorber. As the shock is worked
harder, the oil and gas in the outer chamber begins to mix and form
bubbles, lowering the viscosity of the oil. When this aerated oil passes
through the valve, there is reduced resistance, stopping the shock form
performing correctly. The Foam Cell insert, with its trapped gas micro
cells takes up the empty space in the shock normally taken up by air or
nitrogen gas. This eliminates the possibility of bubbles forming,
allowing the shock to get on with the job with an unparalleled
resistance to shock fade.
- Large 41mm internal bore
- Twin tube design
- High temperature, all weather oil
- 18mm, double chrome-plated rod
- Additional welding on all studs & eyerings
- Multi stage Velocity Sensitive Valving
- Rod wiper seal and multi lip seal
- Hydraulic rebound stop
- 2 Year/40,000km warranty in 0-50mm applications. (conditions apply)
- 1 Year/20,000km warranty in 50mm or higher applications. (conditions apply)
Torsion Bars:
Tough Dog Performance 4WD Torsion Bars offer a spring rate that is approximately 30% higher than OEM bars.
This
dynamic increase in spring rate eliminates hard bottoming out when
travelling off road and gives better handling in street applications.
They can be installed with a moderate pre-load to raise the vehicle for
better clearance off road, or to revitalise the handling characteristics
at the standard height. These performance-proven, easy-to-install bars
are especially beneficial when oversize tyres or frontal accessories are
installed. Regardless of the torsion bar used, or the accessories
fitted, a minimum 60mm of suspension droop (down travel) must be
maintained.
Optimise your 4WD’s ride & handling characteristics with quality torsion bars from ToughDog!
"Kit Installation Charges - $300"
