FREE SHIPPING

ON ORDER OVER $5000

15 Frankston-Dandenong Road

Dandenong 3175

(03) 9769 1967

M-F : 9:00 - 5:00

RUNVA 2UP WINCH ADAPTOR

  • $1,265.00

Product Details

  • Brand: RUNVA
  • Product Code: 2UP-Winch-Adaptor
  • Availability: In Stock

Package Includes:


  • Lower Shaft – installed
  • Lower Shaft double row bearing – installed
  • Lower Pulley and drive Key – installed
  • Drum Bush (suitable for your application) – installed
  • Motor Bearings – installed
  • Lower Double row bearing circlip – installed
  • Shaft Retaining cirlip – installed
  • 2x upper Motor Pulleys – not installed
  • High torque drive belt  – not installed
  • Spreader Bar Bracket (suitable for your application)- not installed
  • Front Cover and Bolts


Features:


  • Made from billet aluminium
  • Quick and easy to install
  • Competition tested
  • Affordable
  • Compatible with Runva low mount winches. EWX9500, EWX9500-Q, EWX9500-Q EVO, 11XP, EWX12000, 13.5XF
  • Additional Motors and Solenoids can be supplied
  • The 2up Winch Adaptor will increase loaded and unloaded speed considerably. Loaded speed is largely increased
  • When a 2up Winch Adaptor is fitted the motors share the load of all winching thus increasing motor life and decreasing heat generated. The 2up winch body acts as an extra large heat sink lowering the motor temperatures further.
  • If one of your winch motors happens to fail you have a back up motor and a fully functioning winch.
  • By placing the motors above the winch this decreases the total width of the set up facilitating ease of placement and the opportunity to increase drum width.
  • The 2up adaptor allows for more rope on the drum as the tie bars have been raised (up to 75 mtrs of 7mm synthetic on standard drum is typical).
  • A 2up Winch Adaptor fitted to a low mount winch is considerably lighter than a 2 motor high mount winch setup. The 2up adaptor kit itself only weighs 5.5 kg (12lb) and is extremely compact. It looks good too!
  • The 2up Winch Adaptor retains the standard low mount bolting pattern.
  • The 2up Winch Adaptor is a truly “multi fit” adaptor and is a one time purchase. If for some reason you want to change to another brand of low mount electric winch all you need to do is purchase a new spreader bar bracket, and drum bush to suit. This will easily convert your 2up Winch Adaptor to fit your new winch in about half an hour. You don’t even have to unbolt the adaptor from its mount!
  • If you have a hydraulic or PTO driven winch on your competition rig then a 2up Winch Adaptor is an ideal choice for your electric back-up.
  • Whilst reliable, hydraulic winches, especially in competition use are very expensive, weighty and command a fair bit of room. The 2up adaptor is about a tenth of the cost and takes up little more room than your everyday low mount electric winch.
  • Paypal